Pay attention to the method of use: The speed and force of screwing in should be appropriate, not too fast or too big. Use a torque wrench or socket wrench as much as possible, and avoid using adjustable wrenches or electric wrenches. Too fast will cause the temperature to rise rapidly and cause lockup. Inlet pump valve The direction of force, the nut must be screwed in perpendicular to the axis of the screw

If the locking speed is too fast, the temperature will rise sharply, and the locking phenomenon will easily occur, and the texture of stainless steel is relatively soft. It is recommended to lock it slowly or apply some lubricating oil.